H&S MODAL TFM2130 Fusionnement
Prix de vente
Contacter pour le prix CAD
+TVH & Licence
Aperçu
|
HYDRAULIC RESERVOIR
|
THE SELF CONTAINED HYDRAULIC SYSTEM HAS A 75 RÉSERVOIR DE GALLON. TOUTES LES TÊTES SONT ENVIRON 31'' EN DIAMÈTRE AVEC UN 8'' DROP TO THE CROSS CONVEYOR. | |
|
HEADS DIVIDED INTO EQUAL LENGTHS
LE 3 TÊTES SUR LES DEUX 30' ET 35' TRI-FLEX MERGER ARE DIVIDED INTO EQUAL LENGTHS. BECAUSE OF THE CENTER CAM AND CENTER DRIVE (BREVET EN COURS) SYSTEM THAT RUNS AT 80 RPM'S, THERE IS LESS GAP BETWEEN THE HEADS. HYDRAULIC MOTORS ON THE ENDS OF EACH FLUTED ROLL, DRIVE THE 42'' WIDE RUBBER W/NYLON CORD CROSS CONVEYOR BELT. A GUIDE GROOVE KEEPS THE BELT ALIGNED. |
|
CONTROL BOX
CONTROL BOX |
|
ROTARY STEERING SENSOR
ROTARY STEERING SENSOR |
|
HIGH TORQUE MOTORS
EITHER 1-3/8'' OR 1-3/4'' 1000 RPM PTO RUNS THE 3-LOW VOLUME 7 GPM PUMPS W/ HIGH TORQUE MOTORS PUMPS THAT DRIVE THE 3 HEADS. |
|
3 ATTELAGE À POINT
3-POINT HITCH IS CAT 2, CHAT3/N, OR CAT3
|
|
AUTO LUBE SYSTEM
AN AUTO LUBE SYSTEM GREASES 80% OF THE TRI-FLEX MERGER. THE TRI-FLEX FEATURES A HEAVY DUTY STEERABLE AXLE AND 16.5 X 16.1 TIRES. WHEN THE TRI-FLEX MERGER IS FOLDED INTO TRANSPORT POSITION, THE STEERING SYSTEM IS LOCKED OUT FOR TRANSPORT. |
|
6 TINE BEARINGS
LE 6 TINE BARS HAVE GRAPHITE IMPREGNATED NYLON SPLIT BEARINGS AND FEATURE U-SHAPED RUBBER TEETH. |
|
CHAUSSURES DE PROTECTION
THE ELLIPTICAL SHAPED SKID SHOES ARE HYDRAULICALLY ADJUSTED FROM THE ELECTRI CONTROL BOX. |
Caractéristiques
Modèle
MODAL TFM2130 Fusionnement
Nom de la catégorie
Agriculture
Année
2014
Type de vente
Nouveau
Manufacturier
H&S
Quantité
0
Quantité fabricant
0
LARGEUR DE TRAVAIL
30'3''
WORKING HEIGHT
7'9''
LARGEUR DE TRANSPORT
11'5''
LONGUEUR DU TRANSPORT
21'8''
HAUTEUR DE TRANSPORT
10'8''
PICK-UP HEADS
3 - 10'1''
PICK-UP STRIPPERS
POLY
PICK-UP TEETH
RUBBER MOUNTED
CONVEYOR BELT WIDTH
42
prise de force - 1000 RPM
1-3/8'' OR 1-3/4''
TAILLE DES PNEUS
16.5 X 16.1
POIDS
15,800#
Documents
-
triflex.pdf
