|
HYDRAULIC RESERVOIR
|
 THE SELF CONTAINED HYDRAULIC SYSTEM HAS A 75 GALLON RESERVOIR. ALL HEADS ARE APPROXIMATELY 31'' IN DIAMETER WITH AN 8'' DROP TO THE CROSS CONVEYOR.
|
|
|
HEADS DIVIDED INTO EQUAL LENGTHS
 THE 3 HEADS ON BOTH 30' AND 35' TRI-FLEX MERGER ARE DIVIDED INTO EQUAL LENGTHS. BECAUSE OF THE CENTER CAM AND CENTER DRIVE (PATENT PENDING) SYSTEM THAT RUNS AT 80 RPM'S, THERE IS LESS GAP BETWEEN THE HEADS. HYDRAULIC MOTORS ON THE ENDS OF EACH FLUTED ROLL, DRIVE THE 42'' WIDE RUBBER W/NYLON CORD CROSS CONVEYOR BELT. A GUIDE GROOVE KEEPS THE BELT ALIGNED.
|
|
CONTROL BOX
 CONTROL BOX
|
|
ROTARY STEERING SENSOR
 ROTARY STEERING SENSOR
|
|
HIGH TORQUE MOTORS
 EITHER 1-3/8'' OR 1-3/4'' 1000 RPM PTO RUNS THE 3-LOW VOLUME 7 GPM PUMPS W/ HIGH TORQUE MOTORS PUMPS THAT DRIVE THE 3 HEADS.
|
|
3 POINT HITCH
 3-POINT HITCH IS CAT 2, CAT3/N, OR CAT3
|
|
AUTO LUBE SYSTEM
 AN AUTO LUBE SYSTEM GREASES 80% OF THE TRI-FLEX MERGER. THE TRI-FLEX FEATURES A HEAVY DUTY STEERABLE AXLE AND 16.5 X 16.1 TIRES. WHEN THE TRI-FLEX MERGER IS FOLDED INTO TRANSPORT POSITION, THE STEERING SYSTEM IS LOCKED OUT FOR TRANSPORT.
|
|
6 TINE BEARINGS
 THE 6 TINE BARS HAVE GRAPHITE IMPREGNATED NYLON SPLIT BEARINGS AND FEATURE U-SHAPED RUBBER TEETH.
|
|
SKID SHOES
 THE ELLIPTICAL SHAPED SKID SHOES ARE HYDRAULICALLY ADJUSTED FROM THE ELECTRI CONTROL BOX.
|
