Cam Track

• Low wear of cam track and guide rollers because:
• Large cam track diameter (40 cm/ 16 in!) for a smooth tine arm control and reduced running speed
• Cam track made from high quality nodular cast iron
• "Crowned" guide rollers
• Guide rollers mounted on dust proof and pre-lubricated bearings
• Tangential tine arm allocation for lowest loads and exact guidance

Tina Arms

• Each tine arm is mounted on two pre-lubricated grooved ball bearings
• Aluminium bearing housings for a reduced total weight
• Each tine arm bearing tube is secured by three bolts for maximum strength
• Block assembly throughout the range for an outstanding ease of repair
• Each tine arm can be replaced separately

Terra Link Quattro

• TerraLink frame open on the down side and therefore is showing torsion flexibility
• Perfect ground adaptation with all wheels close to the tines
• Highest working speed due to preload on front wheels
• Compared to cardanic systems the TerraLink system is able to absorb vibrations and allows a smooth reaction on little ditches in the ground

Headland

• 80° turning thanks to actively steered carrier wheels
• Rotors are lifted hydraulically from the tractor cab, for headland turns and for fast and trouble free turning
• Ground clearance during headland turns is 40 cm/16 in
• Time wise offset lifting from front and rear rotor (adjustable)

Bi-Tangential Tine Arms

• Swathing speed increased as a result of the more effective utilisation of the inner tines
• Tines never mounted directly in driving direction
• Tines lifted higher out of the swath, smoother swath laying
• Increased swath volume

Adjustable Cam Track

• Tine arms are adjustable by moving the cam track
• Easy and stepless adjustment from the outside using a lever
• The moment at which the rakes are lifted out of the swath can be adjusted to adapt it to different amounts and sorts of crop