The ultimate in versatility, Bush Hog’s rugged, tractor-mounted boom mowers are designed to trim trees, brush or hedges and mow behind
guardrails, over fences, down embankments and around ponds. With four models reaching 11 to 18 feet from the tractor centerline, there’s
almost no limit to what you can accomplish. They’re easy to operate and built to provide years of dependable service.

FEATURES

• • Multiple cutting head offerings allow you to fit the RMB Mowers to your particular application. A Rotary Cutter head capable of cutting brush up to 4” in diameter is available for use on the larger RMB1660 and RMB1865(E) models. Flail Heads capable of mowing either grass or brush up to 2” in diameter, or Sickle Bar Cutters that specialize in trimming hedges and mowing round out the cutting head options.

• • RMB models fit tractors as small as 45 engine HP and weighing a minimum 4,410 pounds.

• • Hydraulic breakaway mechanisms on all RMB models break up and away to allow you to clear most obstacles encountered while mowing.

• • The RMB1660 and RMB1865 units offer a Power Slew feature that allows the operator to rotate the cutter 100˚ to the rear, thereby permitting the cutting out of corners and mowing within the tractor’s width.

• • Easy-to-use cable control valve bank for   in-cab operation with an optional electronic proportional valve, joystick, controlled system available on the RMB 1865En model. Models now offer Quick-Detach control cables which permit the operator to leave the controls in the cab when the unit is removed from the tractor.

• • All flail heads on the RMB models come standard with an adjustable front guard and front flap kit to protect from thrown objects, along with a built-in “wire trap” feature to keep loose wires from becoming entangled in the rotor.

• • RMB models offer optional accessories such as a lift float kit and skid kit on certain models.

• The unique PT5 model is powered by the tractor’s hydraulic system, requiring only 3.7 gal./min. flow to operate the unit. A Flow Control Valve Kit comes standard on current models to divert excess hydraulic flow back to the tractor. The PT5 fits tractors as small as 15 HP. Its unique “swing over” design enables the unit to work on either side of the tractor. The PT5 is equipped with a swing arm, sickle bar head to meet the pruning needs of horticulturists and landscapers alike.