Back

ID # 13482381

Yamaha SRViper S-TX DX 137

In Stock

Location:
Some Where

66 $15,999 CAD

Savings $200

get dou_ninvv5 Get Financed Value a Trade Contact Us View Pre-Owned Book a Demo Get Directions Get Directions Print

Conquer Snow

Fast, good-looking and practical? All of the above please. The SRViper S-TX 137 DX can satisfy all three. Tall windscreen & heated seats are must-haves for big miles. The off-trail friendly 137 comes with a new 8 pocket modular bumper, 1.6" lug and semi-hard saddle bags to ensure you're prepared to conquer whatever type of conditions you encounter.

Yamaha Genesis High Performance Engine

3 cylinder
Yamaha YVXC clutch
41mm fuel injection
10 gal (37L) fuel capacity

Semi Hard Saddlebags

Durable exterior
Moisture resitant
Removable

Tall Windscreen

More comfort
Less rider fatigue
Greater wind protection

Performance

High Performance Genesis 4-stroke engine
The over-achieving Genesis® engine is the heart of our lightweight and aggressive SRViper model family. It pulls consistently hard from takeoff to top end. Your thumb cracks a trio of 41mm throttle bodies that deliver strong performance from idle to wide open.
Fuel injection
The Genesis High Performance engine uses Yamaha's advanced fuel injection system to control fuel flow to the engine. Consumers will enjoy the engine's spot-on performance and throttle response as a result of the advanced electronic fuel injection system.
Engine braking reduction system
The Genesis High Performance engine features the unique Engine Braking Reduction System. The system allows a small amount of air to pass through the fuel injection system when the throttle is released, giving riders a "coast" feeling.
Legendary Yamaha Clutching
The SRViper S-TX DX uses the legendary Yamaha YVXC clutching. Easily the most reliable and durable clutch system in the industry, the YVXC has evolved to efficiently handle the unique power characteristics of the Genesis 4-stroke engine.
Multi-purpose magnesium chaincase
The SRViper S-TX DX's chain case and cover serve as both a mounting point for chassis spars and the engine's oil reservoir. Lightweight magnesium construction minimizes weight.
High performance Hayes Brake system
The SRViper S-TX DX's high performance Hayes brake system delivers stopping power with a large-diameter, 8-inch rotor. Mounted low on the drive shaft, you feel immediate whoa-power with a quick stab of the brake. The hydraulic brake's race-inspired radial master cylinder design gives you excellent leverage when needed, with precise brake feel and control.
15 x 137 x 1.6-inch Camoplast® Cobra^TM track
The SRViper S-TX 137 uses the Camoplast® Cobra^TM track, measuring 15 by 137 inches, with 1.6-inch lugs. This lightweight track features a 3-inch pitch design with cupped lugs for excellent deep snow performance without compromising on-trail action. The durable, yet lightweight single-ply design offers performance and efficiency.

Handling

Lightweight, rigid SRV chassis
The SRV chassis combines a load-bearing triangulated structure with lightweight aluminum construction to create a neutrally balanced sled that's centered on the rider. The pyramidal upper frame creates chassis strength without excessive weight.
SRV Front suspension
The SRV front suspension geometry is aimed at managing spindle camber, resulting in minimized bumpsteer and maximized cornering bite and rider confidence in varying trail conditions. The a-arms are mounted at a 30-degree angle from the sled's centerline to efficiently dissipate impact force throughout the entire chassis. Likewise, the front shocks mount directly to the leading spar so that trail forces are routed to the strongest part of the chassis. Wide a-arm spacing minimizes flex and stress in the front suspension system, which means consistent and confident corner handling.
Centralized mass design
The SRV chassis layout was engineered with the goal of centralizing mass. Approximately 60 percent of the sled's weight is tightly centered within the main triangulation. The result is a quick-handling sled that's fun in a wide variety of conditions.
Side exit exhaust
The exhaust exits out the belly on the SR Vipers. The unique chassis layout allows the exhaust to exit the back of the engine, have the 3-into-1 manifold cooled by snow kicked up through a hole in the tunnel and then bring the pipe back to the muffler in a traditional configuration. The end result is mass centralization, excellent handling and consistent performance.
Adjustable ski stance
The ski rubbers on the SRViper S-TX 137 DX are asymmetrical, with a portion of the part serving as a spacer for the ski. This allows riders to adjust the ski stance on the Viper from 42 to 43 inches, center to center, by simply switching the ski rubbers from left to right, and right to left.
Over-the-engine steering
The straight steering post on the SRViper S-TX 137 DX is configured over the engine. It connects to a single bell crank for simplicity and light weight. The design also minimizes freeplay in the steering system and delivers a tight turning radius.
Deep-Keel Tuner ski
The deep-Keel Tuner ski greatly contributes to the SRViper's trail character. The deep keel design is specifically developed to work with the SRViper models to keep the ski tracking straight and true down the trail, virtually eliminating nosiness and darting. Each keel has its own wear-bar, and Yamaha has four different bar configurations to choose from, which means you can tune your sled's cornering bite and steering effort to suit your personal preference.
Tall, hooked handlebars
To match the SRViper S-TX 137 DX's tall and forward riding position, a single-piece, dual-hooked handlebar is standard fare. The hooks have the same grip material as the main bar section, for consistent control, regardless of hand position on the grip.

COMFORT

Aluminum Monotube gas front shock absorbers
These adjustable pre-load, coil over shock absorbers have great small bump compliance with big hit capability.
Comfort-tuned HPG shock package
The SRViper S-TX 137 DX is calibrated for all-day comfort and high mileage adventures. Coil springs over the rebuildable, comfort-tuned HPG shocks add a smoothing action over chattered-out trails.
Dual Shock SR 137 Rear Suspension
The drop-link style Dual Shock SR 137 rear suspension is the cumulative result of years of punishment and development in snocross and cross-country competition. This "crossover" suspension offers premium bump compliance and control on trail, additional bump bridging capabilities thanks to its stretched length, and additional floatation and traction for occasional off-trail use. The SR 137 is a "coupled" suspension that utilizes a unique "sliding" front arm mount. With up to half-inch of movement at the front arm "slot", the system allows the SR 137 to deliver controlled (reduced) ski-lift during acceleration while still retaining front arm bump compliance.
Modular Rear Bumper
The integrated eight pocket design of the new wrap-around bumper easily accommodates and wide assortment of accessories and securely holds a host of genuine Yamaha accessories including a two-up seat, rack, or luggage.
Semi-Rigid Saddlebags
All new Semi-Ridge Saddlebags come standard and offer extensive storage solutions with weatherproof, easy access zippers. The bags feature a semi-rigid design giving them a sleek and integrated looks that blends flawlessly with the snowmobile.
Tapered tunnel design
The SRViper S-TX 137 DX's two-piece, tapered tunnel gives you strength for the long haul and a tapered "fit" for enhanced leg comfort and overall ride positioning.
Large fuel tank
The SRViper S-TX 137 DX's generous 37-litre fuel tank combines with the Genesis engine's acknowledged fuel efficiency to keep you on the trail longer. The Viper S-TX's efficient design philosophy means that even the fuel tank serves multiple functions. Not only does it carry gas for a long day on the trail, but it also cradles the battery and is the platform for the quick-release trail seat.
Tall, sculpted seat
The seat foam on the SRViper S-TX 137 DX is anatomically designed to comfortably put the rider in an aggressive posture with easy transitions from seated to standing to leaning into a corner.
Heated seat
The SRViper S-TX 137 DX comes with a heated seat to help keep you comfortable even in the coldest temperatures. The high-low-off control switch is located on the cab of the sled.
Midheight windshield
The SRViper S-TX DX's windshield was designed to be as functional as it is stylish. It features a tall height with precisely engineered curvatures providing maximum protection from wind and swirl-in, with minimum aerodynamic drag.
Digital gauge
Full-featured and easy to read, the digital gauge displays critical information in a glance including speed, fuel level, trip mileage, tach and more. We even included a clock so you can watch the time fly.
Push button reverse
Convenient handlebar positioning makes getting in reverse easy with just the push of your thumb. A servo motor shifts the drivetrain into reverse simply and consistently.
Standard electric start
Yamaha's electric starter system allows consumers to fire up their SRViper S-TX 137 DX with the turn of a key. There is no pulling on a nylon cord to get this high-tech engine growling! Electric start is a standard feature on all of Yamaha's 4-stroke machines.

Model

SRViper S-TX DX 137

Category Name

Snowmobiles

Sale Type

Manufacturer

Yamaha

Manufacturer Qty

Color

Yamaha Blue / White

Engine Size

1049cc

Width

48'' (1219mm)

Engine

4 Stroke / Liquid cooled

Length

125'' (3175mm)

Ignition

Digital T.C.I. w/T.P.S.

Ski Type

Tuner III

Rear Shocks

Aluminum HPG / Aluminum HPG

Front Travel

10'' (254mm)

Front Shocks

Aluminum Rebuildable HPG

Fuel Delivery

41mm Mikuni??, Fuel Injection

Track (WxLxH)

15'' x 137''x 1.6'' (381 x 3480 x 40.6mm) Camoplast?? CobraTM

Bore And Stroke

82.0 x 66.2mm

Disc Brake Type

Radial Master Cylinder Hydraulic

Fuel Capacity (L)

Ski Stance C To C

42'' (1067mm) adjustable

Suspension (Front)

Independent, Double Wishbone