Fully Welded Cutterbar

• Extremely strong and stiff design, two C channels welded together
• No extra reinforcement needed
• Vertical overlapping
• Welded construction, no risk of loose bolts
• High oil capacity ensuring low working temperature
• One key safety device designed to shear in case of overload
• Low noise level thanks to specially tooled gears

Suspension

• Long design suspension springs provides excellent ground following ability in uneven fields with adaptation range of +19.7”/-5.9”
• Suspension springs are fitted on the widest possible position of the mowing section to ensure even ground pressure of 88-110lbs on each side
• Suspension rod fixation and spring geometry ensure that the mowing section will lift up and backwards if hitting obstacles, protecting the cutterbar

Maintenance

• Easy access to the cutterbar for daily inspection and maintenance
• The complete front plate is easily swung to the side for unlimited access to the cutterbar

Left Hand Drawbar

• The heavy duty swivel hitch headstock with reversible gearbox for either 540 or 1000 rpm PTO
• Unlimited turning angles with constant PTO
• Fully flexible trouble-free operations during headland turns and transport

Semi Swing Steel Tine Conditioner

Conditioner system, taking the best of all known systems The result of thorough testing and engineering work to reach the same aggressive conditioning known from fixed tines and the protection of tines seen on free swinging and nylon tine solutions

OPTIONAL: FlipOver Wide Spreading

• Crop is 100% spread across the whole working width
• The crop is moved to the left, to divide the spread crop from the standing crop
• The FlipOver solution is positioned at the back of the rear-end
• – a solution that gives an improved flow before the crop reaches the spreading vanes
• Benefit: Improved and more even spread over the whole working width

OPTIONAL: Bx Belt

• Bx Belt grouper enables the merging 2 cutting swaths together
• Attaches to back of MoCo and collects the material coming off the conditioner rotor or rollers, It then moves the material to the left and places the material beside the previous windrow