| 88” Cutting width |
A good cutting width for many applications. |
| 35-80 HP Gearbox Rating |
Fits a large array of consumer, municipality and landscape of tractors. |
| 3-Point screw type hitch can be offset 7 3/4” Left & right |
Easily offset the hitch for a closer cut alongside buildings, fences, roadsides and for getting under tree limbs. |
|
ACME threads on offset |
ACME threads are deeper allowing for easy screwing adjustment. |
| One year gearbox warranty |
The gearbox is designed tough to withstand the rigors of flail mowing. |
| 540 RPM cast iron gearbox with over-running clutch |
Enables the rotor to free swing to a stop when the tractor PTO has been turned off. |
| 1/2” – 6” Cutting height |
Variable cutting heights for many uses. Lowest cutting height allows for scalping in grasses such as Bermuda prior to overseeding. |
| 1” Cutting capacity |
Cut saplings when used in a rough setting. |
| Fine cutting knives |
Heavy enough to cut 1” material, yet fine enough to groom a yard. |
| 5 1/2” Rotor diameter |
Large rotor is able to take rough conditions. |
| Reverse rotor rotation |
Brings the cut material up and over which allows it to be dispersed more evenly. |
| High knife tip speed |
Knife tip speed of 9,805 fpm for cleaner cut. |
| Cat. 4 driveline |
Heavy-duty driveline matches up with HP range as well as potential conditions. |
| 4 - 'B' Section belts |
'B' Section belts have more surface to pulley contact and fits deeper in the groove. |
| 3/16” Deck thickness |
Allows the mower to handle rough conditions. |
| Baffles on top inside of deck |
Keeps cut material from clumping together, ensuring an even distribution of clippings. |
| Height adjusting roller |
Rear height adjusting roller with greaseable bearings and tapered ends to prevent gouging during turns. |
| Standard scrapers on rear height adjusting roller |
Keeps roller clean for consistent cutting height. |
| Hinged rear gate |
Can be opened for easier discharge in heavy conditions, or left closed for greater mulching capabilities. |
