ONE MAN OPERATION

THE AUTOMATIC OPERATING MODE ALLOWS THE H&S LINEWRAP TO BE A ONE MAN OPERATION-THE MACHINE WRAPS WHILE THE OPERATOR LOADS. AN OPTIONAL REMOTE IS AVAILABLE FOR SIDE LOADING,

CONTROL BOX

THE LINEWRAP CONTROLS ARE CONVENIENTLY LOCATED. CONTROL BOX FUNCTIONS INCLUDE -AUTOMATIC OR MANUAL OPERATION - MANUAL HOOP REVOLUTION - BALE PUSHER MOVEMENT - START/RESET SWITCH - TAILGATE/BRAKE LOCK - HOOP SPEED CONTROL FOR WRAP.

TELESCOPING TRANSPORT POLE

THE TELESCOPING TRANSPORT POLE IS PINNED TO THE MANUAL STEERING ASSEMBLY WHEN WRAPPING TO KEEP THE LINEWRAP IN A STRAIGHT LINE OR TO STEER AROUND OBSTACLES.

INDEPENDENT POWER SOURCE

THE LINEWRAPS INDEPENDENT POWER SOURCE IS A 13 HORSE POWER GAS ENGINE WITH ELECTRIC START. AN 18 AMP ALTERNATOR POWERS THE HYDRAULIC SYSTEM WHICH CONTROLS ALL MACHINE FUNCTIONS. THE SELF CONTAINED HYDRAULIC SYSTEM UTILIZES A LARGE CAPACITY OIL RESERVOIR FOR COOLER OPERATION.

OPEN DESIGN

THE OPEN DESIGN OF THE 7' BALE PLATFORM ALLOWS DEBRIS TO FALL THROUGH. THE LENGTH OF TRAVEL OF THE PUSH BAR IS CONTROLLED WITH ADJUSTABLE LIMIT SWITCHES TO REDUCE CYCLE TIME. WHEN WRAPPING IS FINISHED, THE BALE-PUSH IS EXTENDED OUT MANUALLY TO PUSH THE BALES FURTHER DOWN THE BALE RAMP AND COMPLETE THE PROCESS.

TWO 30'' PRETENSIONERS

THE LINEWRAP'S TWO 30'' PRETENSIONERS HAVE A 65% STRETCH THAT ALLOWS FOR A TIGHTLY WRAPPED BALE.

PROPER PRESSURE IS KEPT BETWEEN BALES

THE SHUTOFF VALVE MUST BE CLOSED AFTER THE BRAKES ARE HYDRAULICALLY SET AGAINST THE TIRES. THIS PREVENTS THE WRAPPER FROM ROLLING AHEAD TOO EASILY WHEN WRAPPING SO PROPER PRESSURE IS KEPT BETWEEN BALES.

WRAP SQUARE BALES

THE RISER KIT THAT ALLOWS SQUARE BALES TO BE WRAPPED CROSSWISE IS STANDARD EQUIPMENT.

OPTIONAL ELECTRIC OVER HYDRAULIC STEERING ASSEMBLY

AN OPTIONAL ELECTRIC OVER HYDRAULIC STEERING ASSEMBLY IS CONTROLLED BY THE LOADING OPERATOR WITH A REMOTE CONTROL.

CONTROL BOX OPTIONS

THE CONTROL BOX (C) AND REMOTE CONTROL (B) CAN BE ORDERED WITH YOUR CHOICE OF EITHER OF THE FOLLOWING OPTIONS: BALE WRAPPING START AND STOP OR BALE WRAPPING START/STOP AND STEERING OF THE LINEWRAP.

OPTIONAL LIGHT KIT

THE OPTIONAL LIGHT KIT IS A NICE FEATURE FOR EVENING AND NIGHT WRAPPING IN COOLER CONDITIONS.

OPTIONAL WRAP SQUARE BALES

THE OPTIONAL RISER/SHELF AND 3RD SPEAR IS NEEDED TO WRAP UP TO 6 1/2' LONG SQUARE BALES LENGTHWISE.

TRANSPORT BAR

THE TAILGATE HAS A TRANSPORT BAR TO LOCK THE TAILGATE AND A HYDRAULIC SHUTOFF VALVE THAT MUST BE CLOSED FOR TRANSPORT.

MAXIMIZES BALEAGE YEILD

THE H&S LINEWRAP MAXIMIZES BALEAGE YIELD, REQUIRES LESS EFFORT AND TIME THAN CONVENTIONAL WRAPPING METHODS, AND WITH ONLY THE DIAMETER OF THE BALE WRAPPED, REDUCES WRAP COST.