Automobiles

Tilt Attachment Great for Landscapers Mounts between skidsteers and buckets with universal hitch Tilts 18° left and right PART# NAME TILT DEGREES APPROX. WEIGHT LBS. TAUN UNIVERSAL SKIDSTEER TILT ATTACHMENT 18 425 ...

Three Point Hitch Adaptor Adapter attaches to loader then allows you to hook up to 3 point hitch equipment Bottom two arms slide for easy hook up Comes with Reese hitch receiver Approx. weight: 210 lbs. PART# NAME APPROX. WEIGHT LBS. 3PHA THREE POINT ...

Weld-on Kits Weld-on kits are one or two pieces, depending on loader mount configuration. PART# NAME WOKAO500 ALO 500 SERIES QTACH WELD ON KIT WOKAO600 ALO QTACH WELD ON KIT WOKBO500 UNIVERSAL SHIDSTEER WELD ON KIT WOKHA35QT HARDY 35 QTACH WELD...

Trailer Hitch 2 inch Receiver 2” Receiver Ideal for moving light trailers around the yard PART# NAME APPROX. WEIGHT LBS. TH2 Trailer Hitch 2" Receiver 190   ...

PTO Adapter 3 Point Hitch PTO Adapter 3 Point Hitch for Skidsteer Ideal for brush cutters & snow blowers etc. 50-60 HP output (30-40 gpm high flow required) Category 1 & 2 compatible Complete with adjustable top link Includes high flow hose & coupler kit ...

High Dump Bucket High dump bucket increases dump out height by 48” Exclusive flat bottom bucket design allows for easier clean out & no capacity sacrifice PART# NAME OUTSIDE WIDTH INCHES STRUCK CAP. CU. FT. SAE HEAPED CAP. CU. FT. APPROX. WEIGHT ...

4 - IN - 1 Bucket (Skidsteer) Includes cylinders Main bucket material ¼” 3/8” end plates 3/8” clam floor bottom Skidsteer - 27” deep, 20” high Loader - 30” deep, 27” high NOTE: Add 2” to Inside Width column to calculate outside width of bucket ...

Tree Spade Ideal for transplanting trees and shrubbery Scoop made from ¼” material 33” wide 48” deep Approximate weight: 390 lbs Note: For skidsteers only PART# NAME TS48 TREE SPADE   ...

Heavy Duty Stump Bucket Designed to rip through roots and remove stumps Works well to dig out boulders and dig shallow trenches Comes with three removable digging teeth Serrated side edges PART# NAME STM Heavy Duty Stump Bucket   ...

Concrete Slab Lifter Bucket Ideal for removing concrete on sidewalks, driveways and construction sites Three heavy-duty shanks with replaceable points and rubberized flex pins Optional hydraulic thumb for increased versatility PART# NAME APPROX. WEIGHT LBS....

Concrete Funnel Bucket Reduces back breaking manual labour Transports and cleans up easily Hauls up to 1/2 yard of concrete Eliminates the need for a wheelbarrow Works great in tight areas Attaches to most skid loaders Easy to attach and use 60” wide x 19” deep...

4 - IN - 1 Bucket (Front End Loader) Includes cylinders Main bucket material ¼” 3/8” end plates 3/8” clam floor bottom Skidsteer - 27” deep, 20” high Loader - 30” deep, 27” high NOTE: Add 2” to Inside Width column to calculate outside width of bucke...

Side Discharge Sand Bucket Minimum 12 GPM required Baffle brace and beater to improve flow and keep weight off of belt 32” high Two hydraulic motors on discharge belt (72”, 84”, and 96" only) NOTE: For outside width add 1” to inside width column. OPTIONAL:3-P...

Side Discharge Sawdust Bucket Minimum 12 GPM required Hydraulic drive (coupled direct) Beater to prevent bridging 12” wide belt c/w ¾” cleat Discharge from both sides of machine Guide on belt for true tracking 10 ga material 42” high Two hydraulic motors on...

Compact Utility Bucket - Front End Loader 1/8" material, 3/16" end plates 1/2" x 4" bevelled cutting edge 18" deep, 19" high 80 degree slope on back of bucket Note: Add 1” to Inside Width column to calculate Outside Width of bucket PART# NAME INSIDE WID...

Standard Front End Loader Bucket - REGULAR DUTY REGULAR DUTY 3/16” material, ¼” end plates 3/4 X 4 bevelled cutting edge Reinforced top lip 29” deep, 25” high Reinforced round back and end plates for strength, easy filling & clean out Flat top acts as l...

Standard Front End Loader Bucket - HEAVY DUTY HEAVY DUTY ¼” material, ¼” end plates 3/4 X 6 bevelled cutting edge Reinforced top lip 31” deep, 25” high Reinforced round back and end plates for strength, easy filling & clean out Flat top acts as level i...

High Volume Front End Loader Bucket - REGULAR DUTY Regular duty 3/16” material, ¼” end plates 3/4 X 4 bevelled cutting edge Reinforced top lip 33” deep, 31” high Reinforced round back and end plates for strength, easy filling & clean out Flat top acts a...

High Volume Front End Loader Bucket - HEAVY DUTY Heavy duty ¼” material, ¼” end plates 3/4 X 6 bevelled cutting edge Reinforced top lip 35” deep, 31” high Reinforced round back and end plates for strength, easy filling & clean out Flat top acts as leve...

Extra High Volume Front End Loader Bucket - REGULAR DUTY REGULAR DUTY 3/16” material, ¼” end plates 3/4 X 4 bevelled cutting edge Reinforced top lip 38” deep, 35” high Reinforced round back and end plates for strength, easy filling & clean out Flat top ...

Extra High Volume Front End Loader Bucket - HEAVY DUTY HEAVY DUTY ¼” material, ¼” end plates 3/4 X 6 bevelled cutting edge Reinforced top lip 38” deep, 35” high Reinforced round back and end plates for strength, easy filling & clean out Flat top acts a...

Heavy Duty Option Heavy duty versions available on all buckets Made from all 1/4" material 3/4 x 6 bevelled cutting edge Sides reinforced with flat bar Reinforced top lip PART# NAME MBHV96HD HEAVY DUTY VERSIONS AVAILALE ON ALL BUCKETS   ...

Standard Bucket & Regular Utility Grapple Standard (Front End Loader) Bucket & Regular Utility Grapple Opens up to 70” Comes with cylinders PART# NAME APPROX. WEIGHT LBS. MB72GR66 72” RD Standard Material Bucket & GR66 Grapple 855 M...

Compact Utility Bucket - SkidSteer 1/8” material, 3/16” end plates ½ X 4 bevelled cutting edge 23” deep, 18” high 65° slope on back of bucket Note: Add 1” to Inside Width column to calculate Outside Width of bucket PART# NAME INSIDE WIDTH INCH...

Standard Skidsteer Bucket - REGULAR DUTY REGULAR DUTY 3/16” material, ¼” end plates 3/4 X 4 bevelled cutting edge Reinforced top lip• 29” deep, 25” high Reinforced round back and end plates for strength, easy filling & clean out Flat top acts as level ...

Standard Skidsteer Bucket - HEAVY DUTY HEAVY DUTY ¼” material, ¼” end plates 3/4 X 6 bevelled cutting edge Reinforced top lip 31” deep, 25” high Reinforced round back and end plates for strength, easy filling & clean out Flat top acts as level indicato...

High Volume Skidsteer Bucket - REGULAR DUTY REGULAR DUTY 3/16” material, ¼” end plates 3/4 X 4 bevelled cutting edge Reinforced top lip 33” deep, 32” high Reinforced round back and end plates for strength, easy filling & clean out Flat top acts as level...

High Volume Skidsteer Bucket - HEAVY DUTY HEAVY DUTY ¼” material, ¼” end plates 3/4 X 6 bevelled cutting edge Reinforced top lip 35” deep, 32” high Reinforced round back and end plates for strength, easy filling & clean out Flat top acts as level indic...

Low Profile Skidsteer Bucket - REGULAR DUTY Regular duty 3/16” Material, ¼” end plates ¾ X 4 bevelled cutting edge Reinforced top lip 31” deep, 19” high Lower back and longer base enables operator to see cutting edge of bucket Tapered end plates are self-c...

Low Profile Skidsteer Bucket - HEAVY DUTY Heavy duty ¼” Material, ¼” end plates ¾ X 6 bevelled cutting edge Reinforced top lip 33” deep, 19” high Lower back and longer base enables operator to see cutting edge of bucket Tapered end plates are self-cleanin...